Smartlock Slide Retainer And Limit Switch
SMARTLOCK slide retainer and limit switch provides slide retention plus mold component verification in an injection molding application. The unique locking function prevents premature slide movement during molded part ejection while the SPDT switch is simultaneously actuated.
The Smartlock slide retainer and limit switch was tested for reliability over 10 million cycles without failure. Two or more switches may be used for larger molds, or molds with multiple slides. Prevention of mold damage is improved when the Smartlock slide retainer and limit switch is installed in a mold.
Features and Benefits
- Over 10 million cycle life provides long dependable service.
- 27 pounds holding force: adjustable for optimum operation.
- 175°F (79.4°C) standard temperature rating allows installation into most molding applications.
- 250°F (121°C) high temperature unit provides additional application flexibility.
- Superior flush mount switch shielded from damage by mounting inside a protective milled pocket.
- Stripped and tinned 6ft. (1.8M) wire leads make the switch ready to install without modification.
- Included mounting screws and wire clips help install the Smartlock switch neatly and easily.
- U.S. Patent No. 6,126,429
- CE Compliant Low Voltage Directive EN 60947-5-1
Mode of Operation
Installed in the slide, the plunger moves into a recess in the locking plate of the switch assembly, which is installed in the mold plate. The switch actuator, located in the bottom of the recess, closes the normally open switch contacts when the plunger is seated in the locking plate recess. When the break away force is applied to the slide, the lock is released, and the switch returns to normally open state.
